Supermicro Motherboard MBD-X10SLQ-L-B Core i7/i5/i3 LGA1150 Socket H3 Q87 DDR3 SATA microATX Bulk

1. Single socket H3 (LGA 1150) supports Intel 4th gen. Core i7/i5/i3, Pentium, Celeron processors

2. Intel Q87 Express Chipset

3. Up to 16GB DDR3 non-ECC 1600MHz UDIMM in 2 sockets

4. Dual Gigabit Ethernet LAN ports (1x Intel i217LM 1x Intel i210AT)

5. 5x SATA 3.0 (6Gb/s)

6. 1x PCI-E 3.0 x16, 1x PCI-E 2.0 x4, and 1x PCI-E 2.0 x1

7. 2x USB 3.0 (2 rear) 6x USB 2.0 (2 rear + 4 via headers)

8. HD Audio 7.1 channel connector by Realtek ALC888S

9. 1x DOM power connector, 1x SPDIF Out Header, 4x COM ports

10. AMT 9.0, vPro

11. UEFI BIOS support

Form Factor
uATX

Processor/Cache
CPU:
Intel 4th Gen Core i7/i5/i3, Pentium, Celeron processors
Single Socket H3 (LGA 1150)
System Memory
Memory Capacity:
2x 240-pin DDR3 DIMM sockets
Supports up to 16 GB DDR3 non-ECC Un-Buffered memory (UDIMM)

Memory Type:1600MHz non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes:8GB, 4GB, 2GB, 1GB
Memory Voltage:1.5V, 1.35V
On-Board Devices
Chipset:Intel Q87 Express Chipset
SATA:SATA3 (6Gbps) w/ RAID 0, 1, 5, 10 via PCH with Intel RST

Network Controllers:
Intel i217LM + Intel i210AT Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Audio:RealTek ALC888S 7.1 High Definition Audio
Video:Intel HD/4600 Processor Graphics
Super I/O:NCT6776D
Input / Output
Serial ATA:5x SATA 3.0 ports (6Gbps)
LAN:2x RJ45 Gigabit Ethernet LAN ports

USB:
2x USB 3.0 ports (2 rear)
6x USB 2.0 ports (2 rear, 4 via headers)

Audio:7.1 HD Audio header and rear I/O
Display:1x VGA, 1x HDMI, 1x DVI-D, 1x Display port from Intel HD 4600 Graphics, 3x Independent Displays
Serial Port / Header:4x COM ports (headers) COM2 with RS422/485 support
DOM:SATA DOM (Disk on Module) power connector support
Security:1 TPM 1.2 20-pin Header
Expansion Slots
PCI-Express:
1x PCI-E 3.0 x16 (in x16) slot
1x PCI-E 2.0 x4 slot
1x PCI-E 2.0 x1 slot

System BIOS
BIOS Type:128Mb SPI Flash EEPROM with AMI BIOS

BIOS Features:
DMI (SMBIOS) 2.7
ACPI 5.0
USB Keyboard support
Management
Software:
SuperDoctor III
Watch Dog
AMT
NMI
vPro

Power Configurations:
ACPI / ACPM Power Management
Main Switch Override Mechanism
Power-on mode for AC power recovery
Internal/External modem ring-on
PC Health Monitoring
Voltage:
Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN:
Total of four 4-pin fan headers supporting up to 4 fans
4x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature:
Monitoring for CPU and chassis environment
CPU thermal trip support
Adaptive Thermal Monitor, PECI 3.0

LED:
CPU / System Overheat LED
+5V Standby alert LED

Other Features:
Chassis intrusion detection
Chassis intrusion header
Weight:
3 lb

Warranty Information:
1 Year