1. Dual AMD EPYCTM 7000-Series Processors 2. 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs 3. Expansion slots: 2 PCI-E 3.0 x16 3 PCI-E 3.0 x8 4. 10 SATA3, 1 M.2, 2 SATA DOM 5. Dual Gigabit Ethernet LAN Ports 6. ASPEED AST2500 BMC graphics 7. Up to 2 USB 3.0 ports Up to 4 USB 2.0 ports 8. 8 4-pin PWM Fan & Speed control
Physical Stats Form Factor:E-ATX Dimensions:12" x 13.05" (30.5cm x 33.1cm) Processor/Chipset CPU:Dual AMD EPYCTM 7000-series Processors Socket SP3 Cores:Up to 32 Cores Chipset:System on Chip System Memory Memory Capacity:16 DIMM sockets Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs 8-channel memory bus For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks See Detailed Memory Support Matrix Memory Type:DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs DIMM: Sizes8GB, 16GB, 32GB, 64GB, 128GB Memory Voltage:1.2V Error Detection:Corrects single-bit errors Detects double-bit errors (using ECC memory) On-Board Devices SATA:SATA3 (6 Gbps) IPMI:Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2500 BMC Network Controllers:2 1GbE LAN via Intel i350-AM21 1 Realtek RTL8211E PHY (dedicated IPMI) VGA:ASPEED AST2500 BMC Input / Output SATA:10 SATA3 (6 Gbps) ports LAN:2 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port USB:2 USB 3.0 ports (rear) 4 USB 2.0 ports (2 rear + 2 via header) VGA:1 VGA port Others:1 COM port (rear) 2 SATA DOM power connector 1 TPM 2.0 header Expansion Slots PCI-Express:3 PCI-E 3.0 x8 2 PCI-E 3.0 x16 M.2:Interface: PCI-E 3.0 x2 Form factor: 22110 Support SATA devices Chassis ( Optimized for H11DSi ) 2U Chassis:CSE-213AC-R1K23LPB CSE-216BE1C4-R1K23LPB CSE-826BE1C4-R1K23LPB CSE-829HE1C4-R1K62LPB 3U Chassis:CSE-836BE1C-R1K23B 4U Chassis:CSE-745BAC-R1K28B2 System BIOS BIOS Type:AMI 128Mb SPI Flash EEPROM BIOS Features:Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1 Management Software:Super Doctor 5 Watch Dog NMI SPM SUM IPMI 2.0, KVM with dedicated LAN Power Configurations:ACPI Power Management Power-on mode control for AC power loss recovery PC Health Monitoring CPU:Monitors CPU Core Voltages, +1.5V, +1.8V, +12V +5V, +5V standby CPU switching voltage regulator Supports system management utility VBAT FAN:Up to 8-fan status tachometer monitoring Up to eight 4-pin fan headers Dual Cooling Zone Status monitor for speed control Pulse Width Modulated (PWM) fan connectors Temperature:Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 8x Fan connectors I2C Temperature Sensing Logic LED:CPU / System Overheat LED Other Features:Chassis Intrusion Detection Chassis Intrusion Header UID Operating Environment / Compliance Environmental Specifications:Operating Temperature:10oC to 35oC (50oF to 95oF) Non-operating Temperature: -40oC to 70oC (-40oF to 158oF) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) Item Dimension (L inchxW inchxH inch) NA Weight 5.00lb Warranty Information 1 Year