The Shuttle XPC slim Barebone DH110 is a robust 1.3l Barebone PC with H110 chipset for Intel LGA1151 desktop processors, codenamed "Skylake". It allows for two displays to be operated at the same time and offers Dual Intel LAN and COM ports. Its slim metal chassis comes with a VESA mount included, provides versatile connectivity and reliable operation in environments with ambient temperatures of up to 50C. This platform is targeted at professional applications such as Digital Signage, POS, POI, gambling machines, office, healthcare and industry.
Chassis Nettop PC with black chassis made of metal Two holes for Kensington Locks and numerous threaded holes (M3) at both sides of the chassis Storage bay 1x 6.35 cm / 2.5 inch storage bay supports one hard disk or SSD drive Device height: 12.5 mm (max.) Operation System This system comes without operating system. It is compatible with Windows 7 / 8.1 / 10, Linux - 64 bit Mainboard / Chipset / BIOS Chipset: Intel H110 Chipset (Intel DH82H110 PCH, code name "Sunrise Point") Platform Controller Hub (PCH) as Single-Chip-Solution AMI BIOS in 8 Mbit EEPROM with SPI interface All capacitors are high quality solid capacitors Supports hardware monitoring and watch dog functionality Supports Unified Extensible Firmware Interface (UEFI) Supports power on after power failure Power Adapter External 90 W power adapter (fanless) Input: 100 to 240 V AC, 50/60 Hz Output: 19 V DC, 4.74 A, max. 90 W DC Connector: 5.5/2.5mm (outer/inner diameter) Remark: the DC-input of the computer supports an external power source with either 12V Plus Minus 5 percent or 19V Plus Minus percent. Processor support Socket LGA 1151 (H4) supports the sixth generation of Intel Core i7 / i5 / i3, Pentium and Celeron processors. Maximum supported processor power consumption (TDP) 65W Codename "Skylake", 14nm process technology, up to 8 MB of L3 cache Not compatible with Intel Xeon E3 V5 processors for socket LGA1151 and processors with the older Socket LGA 1150. Does not support the unlock-function of Intel K-Series processors. The processor integrates PCI-Express, memory controller and the graphics engine on the same die (performance features depending on processor type) Processor cooling Heat-pipe processor cooling with two 60 mm fans on the upper side of the chassis Memory support 2x SO-DIMM slots with 204 pins Supports DDR3L-1333/1600 (PC3-10600/12800) SDRAM at 1.35V Supports Dual Channel mode Supports max. 16 GB per DIMM, maximum total size of 32 GB Supports two unbuffered DIMM modules (no ECC) Notice: This mainboard does only support 1.35V DDR3L memory modules. Note: DDR3L has a lower operation voltage compared to DDR3 Integrated Graphics The features of the integrated graphics function depend on the processor type used. Two digital video outputs: DisplayPort 1.2 and HDMI 1.4 - supports two independent Full HD displays simultaneously - supports Full HD resolution at 1920x1200 (1080p/60Hz) - supports 4K UHD resolution at 3840 x 2160 (max. 2160p/60Hz on DP or max. 30Hz on HDMI) - supports Blu-ray (BD) playback with HDCP - supports HD video plus multi-channel digital audio via a single cable. Optional analog D-Sub/VGA video output M.2-2260 BM Slot The M.2 2260 BM slot provides the following interfaces: - PCI-Express v2.0 X4 - SATA v3.0 (6 Gbps) It supports M.2 cards with a width of 22 mm and a length of 42 or 60 mm (type 2242, 2260). Cards with 80mm length (2280) are not supported. Supports M.2 SSD cards with PCIe or SATA interface. M.2-2230 AE Slot The M.2 2230 AE slot provides the following interfaces: - PCI-Express v2.0 X1 - USB 2.0 It supports M.2 cards with a width of 22 mm and a length of 30 mm. This slot is intended for Wireless LAN (Wifi), Bluetooth, GSM/UMTS cards and others. A SATA interface for SSD cards is not available here. Audio Audio Realtek ALC 662 5.1 channel High-Definition Audio Two analog audio connectors (3.5mm) at the front panel: 1) 2-channel line out (head-phones) 2) microphone input Digital multi-channel audio output: by HDMI and DisplayPort Dual Gigabit LAN Controller Dual network with two RJ45 ports Used network chips: 1) Intel i211 Ethernet Controller with MAC, PHY and PCIe interface 2) Intel i219LM PHY connected to the MAC of the processor Supports 10 / 100 / 1.000 MBit/s operation Supports WAKE ON LAN (WOL) Supports network boot by Preboot eXecution Environment (PXE) Supports Teaming mode Drive connectors 1x Serial-ATA III, 6 Gb/s (600 MB/s) bandwidth With Serial-ATA power connector (onboard) Card Reader Integrated card reader Supports SD, SDHC and SDXC memory flash cards Supports boot up from SD card Front Panel connectors Microphone input Audio Line-out (headphone) 2x USB 3.0 2x USB 2.0 SD card reader Power button Power LED (blue) HDD LED (yellow) Back Panel connectors 1x HDMI connector 1x DisplayPort connector (DP) Optional 1x D-Sub VGA connector (Accessory PVG01 ) 2x USB 3.0 1x eSATA/USB 2.0 combo 2x Gigabit LAN (RJ45) 2x RS232 serial port, 9-pin D-Sub (5/12V, 1x RS422/RS485) DC-input connector for external power adapter (supports 12V Plus Minus 5 percent or 19V Plus Minus percent. 4-pin connector (2.54 mm pitch) supports - external power on button - Clear CMOS function - +5V DC voltage for external components 1x PS/2 Combo supports keyboard or mouse 2x Perforation for optional Wireless LAN antennas 2x hole for Kensington Locks Other onboard connectors 1x jumper for power on after power fail (hardware solution) 1x analog VGA graphics output CN6 (2x1-pin, 1mm pitch) 2x serial interface (COM) occupied by back panel connectors 1x fan connector (4-pin) occupied by the cooling system 1x connector for CMOS battery (occupied) Supplied Accessories Multi-language user guide (EN, DE, FR, ES, JP, KR, SC, TC) VESA mount for 75/100mm standard (two metal brackets) Four thumbscrews M3 x 5 mm (screws together VESA mount and PC) Four screws M4 x 10 mm (to affix VESA mount on the PC) Four screws M3 x 4 mm (to mount a 2.5 inch storage device into the bay) Driver DVD (Windows 64-bit) Serial ATA cable for 2.5 inch drive including power cable External 90W power adapter with power cord Protection cap for CPU socket (do not use if heat-pipe or fan is mounted) Heatsink compound Optional Accessies PVG01: optional D-Sub VGA video output WLN-M.: WLAN module in M.2-2230 format supports IEEE 802.11ac and Bluetooth 4.0