Kingston Memory KVR16LS11/4 4GB DDR3 1600 SODIMM 1.35V Retail

This document describes ValueRAM's 512M x 64-bit (4GB) DDR3L-1600 CL11 SDRAM (Synchronous DRAM), 1Rx8, low voltage, memory module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.35V or 1.5V. This 204-pin SODIMM uses gold contact fingers. The electrical and mechanical specifications are as follows::


Features:



JEDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V) Power Supply

VDDQ = 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V)

800MHz fCK for 1600Mb/sec/pin

8 independent internal bank

Programmable CAS Latency: 11, 10, 9, 8, 7, 6

Programmable Additive Latency: 0, CL - 2, or CL - 1 clock

8-bit pre-fetch

Burst Length: 8 (Interleave without any limit, sequential with starting address 000 only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]

Bi-directional Differential Data Strobe

Internal (self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm 1%)

On Die Termination using ODT pin

Average Refresh Period 7.8us at lower than TCASE 85C, 3.9us at 85C < TCASE < 95C

Asynchronous Reset

PCB: Height 1.18 (30mm), double sided component

CL (IDD)
11 Cycles
Row Cycle Time (tRCmin)
Refresh to Active/Refresh Command Time (tRFCmin)
260ns (Min)
Row Active Time (tRASmin)
35ns (Min)
Maximum Operating Power
(1.35V) 2.376W
UL Rating
94V 0
Operating Temperature
0 C to 85 C
Storage Temperature
-55 C to +100 C
Item Dimension (L"xW"xH")
2.17 x 6.7 x 0.52

Weight
1.00 lb

Warranty Information
Lifetime Manufacture