EnGenius Networking EAP1300EXT EnTurbo 11ac Wave 2 Indoor Wireless Access Point with High-Gain Antennas Retail

The 802.11ac built-in high performance Access Point with MU-MIMO technology for high-density use on multiple applications.
Built-in Turbo Engine solution with powerful Quad-core chipset

Dual radio 2x2 802.11 ac/a/b/g/n AP with MU-MIMO

Up to 867 Mbps on the 5Ghz band

Up to 400 Mbps on the 2.4 GHz band

High powered amplifiers to improve wireless coverage

Support 802.11ac Wave 2.0 technology

802.3af PoE Compliant

External RP-SMA 360 omni-directional antennas

5dBi antennas

multiple operation modes

Access Point Type
Indoor, dual radios concurrent, 5GHz 802.11 ac 2x2 MIMO is back-wards compatible with 802.11 a/n mode, 2.4GHz 802.11 n 2x2 MIMO is backwards compatible with 802.11 b/g.
SU-MIMO
Two(1) spatial stream SU-MIMO for up to 1,267 Mbps wireless data rate to a single wireless client device.
MU-MIMO
Two(1) spatial stream MU-MIMO for up to 867 Mbps wireless data rate to transmit to two(2) MU-MIMO capable wireless client devices simultane-ously.
Frequency Radio
2.4GHz: 2400MHz to 2835MHz,
5GHz: 5150MHz to 5250MHz, 5250MHz to 5350MHz, 5470 to 5725MHz, 5725MHz to 5850MHz
Support radios and channels
Supported Radio Technology
802.11b: Direct-sequence spread-spectrum (DSSS)
802.11ac/a/g/n: Orthogonal frequency-division multiplexing (OFDM)
802.11n/ac: 2x2 MIMO with 4 streams
802.11ac supports very high throughput (VHT) - VHT 20/40/80 MHz
802.11n supports high throughput (HT) - HT 20/40 MHz
802.11n supports very high throughput under the 2.4GHz radio -VHT40 MHz (256-QAM)
802.11n/ac packet aggregation: A-MPDU, A-SPDU
Supported Modulation Type
802.11b: BPSK, QPSK, CCK
802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Transmit Power (Maximum Value)
2.4GHz: 21dBm
5GHz: 21dBm
Tx Beamforming (TxBF)
Increasing signal reliability and transmitting distance. Supported data rates (Mbps)
802.11b: 1, 2, 5.5, 11
802.11a/g: 6, 9, 12, 18, 36, 48, 54
802.11n: 6.5 to 300 (MCS0 to MCS15)
802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS1 to 2)
Power
Maximum Power Consumption: 10W
Power Source:
- Direct DC Input: 12V/1A
- Power Over Ethernet: 802.3af Input
Antenna
EAP1300EXT: (External Antenna)
- 2.4GHz: Two detachable 5.0dBi RP-SMA antennas
- 5GHz: Two detachable 5.0dBi RP-SMA antennas
Interfaces
Networking Interface: One (1) 10/100/1000 BASE-T RJ-45 Ethernet Ports
DC Powering Interface: One (1) DC Jack interface
LED Indicators: Display system and wireless transmission status
Reset Button: Convert Access Point to the Factory default or the Users Default
Mounting
Ceiling Mounting: Assemble a mounting bracket for drop ceiling
Wall Mounting: Mount Access Point on a flat wall
Environment
Operating Temperature: 0^oC to 40^oC (32^oF to 104^oF)
Operating Temperature: Humidity: 0% to 90% typical
Storage Temperature: -30^oC to 80^oC (-22^oF to 176^oF)
Storage Temperature: Humidity: 0% to 90% typical
Compliance Regulatory
FCC:
- Subpart15 B
- Subpart C 15.247
- Subpart E 15.407
CE:
- EN 300 328
- EN 301 893
- EN 50385
- EN 60601-1-1
- EN 60601-1-2
- EN 55032
- EN 55024
R and TTE Directive 1995/5/EC
Low Voltage Directive 72/23/EEC
Item Dimension (L inchxW inchxH inch)
12 x 9 x 3

Weight
2.00 lb

Warranty Information
1 Year