D-Link Networking DGS-1510-52XMP 52 Port DGS-1510 Gigabit PoE Switch 10GbE SFP+ 370W Brown Box

The DGS-1510 Series is D-Links latest generation of stackable Gigabit switches with 10G port connectivity, suitable for business networks of all sizes. The DGS-1510 Series provides a reliable, scalable, and modular interconnection between core switches and edge switches with rich capabilities and simplified flexibility. Available in 16, 24 and 48 10/100/1000 Mbps port models, these switches also include four optical ports including two or four 10G SFP+ ports.

Power over Ethernet (DGS-1510-28P, DGS-1510-28XMP and DGS-1510-52XMP only)
All 10/100/1000 Mbps ports on the DGS-1510-28P, DGS-1510-28XMP and DGS-1510-52XMP are PoE-enabled, for powering devices such as IP cameras, VoIP phones and wireless access points. Compliant with IEEE 802.3af and IEEE 802.3at, these models support up to 30W of power output on any particular PoE port. The total PoE power budgets are 193W for the DGS-1510-28P, and 370W for the DGS-1510-28XMP and DGS-1510-52XMP. Additionally, the power budget for the DGS-1510-52XMP can be increased to 740W when utilized with the DPS-700 redundant power supply, allowing the switch to power even more devices.
Time-based PoE enables power to a port to be shut off at a scheduled time, reducing power usage and increasing security by powering off devices that should not be in use during non-business hours. A unique PD-alive feature, ideal for surveillance networks, pings attached PDs (IP Cameras, wireless access points) and resets the PoE power when inactivity is detected.

General
Hardware version : DGS-1510-52XMP: A1
Port Standards and Functions : IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
802.3ae 10 GbE
IEEE 802.3x Flow Control for Full-Duplex Mode
Auto-negotiation
Number of Ports : DGS-1510-52XMP: 48 10/100/1000 Mbps PoE capable, 4 10G SFP+
Network Cables : UTP Cat. 5, Cat. 5e (100 m max.) EIA/TIA-568 100-ohm STP (100 m max.)
Full/Half Duplex : Full/half duplex for 10/100 Mbps and Gigabit speed
Media Interface Exchange : Auto or configurable MDI/MDIX
Performance
Switching Capacity : DGS-1510-52XMP: 176 Gbps
Transmission Method : Store-and-forward
MAC Address Table : 16,000 entries per device
MAC Address Update : Up to 512 static MAC entries,
Enable/disable auto-learning of MAC addresses
Maximum 64 bytes Packet Forwarding Rate: DGS-1510-52XMP: 130.95 Mpps
Packet Buffer Memory : DGS-1510-52XMP: 3 MB per device
PoE (DGS-1510-28P, DGS-1510-28XMP and DGS-1510-52XMP only)
PoE Standard: DGS-1510-52XMP: IEEE 802.3af, 802.3at
PoE Capable Ports Ports: DGS-1510-52XMP: 1 to 48: up to 30 W
PoE Power Budget: DGS-1510-52XMP: Max 370 W (without DPS-700) Max. 740W (with DPS-700)
Physical and Environmental
AC Input : 100 to 240 VAC 50/60 Hz internal universal power supply
Maximum Power Consumption : DGS-1510-52XMP: 486.9 W (PoE on), 58.8 W (PoE off)
Standby Power Consumption: DGS-1510-52XMP: 40.1 W
Smart Fan Quantity: DGS-1510-52XMP: 4
Acoustics: DGS-1510-52XMP: 55.4 dB(A)
Heat Dissipation: DGS-1510-52XMP: 1660.33 BTU/hr
Operation Temperature : 23 to 122 ^oF (-5 to 50 ^oC)
Storage Temperature : -4 to 158 ^oF (-20 to 70 ^oC)
Operation Humidity : 0% to 95% non-condensing
Storage Humidity : 0% to 95% non-condensing
Dimensions : DGS-1510-52XMP: 17.36 x 9.84 x 1.73 inches (440 x 250 x 44 mm)
19 standard rack mounting width 1U
Weight DGS-1510-52XMP: 11.93 lbs (5.41 kg)
Diagnostic LEDs : Power/Stacking ID/Fan (per device),
Link/Activity/Speed (per 10/100/1000 Mbps port),
Link/Activity/Speed (per Gigabit SFP port),
Link/Activity/Speed (per 10G SFP+ port)
Certifications : CE, FCC, C-Tick, VCCI, BSMI, CCC
IPv6 Ready Logo Phase 2 (DGS-1510-20/-28/-28X/-28P/-28XMP only)
Safety: cUL, CB
MTBF: DGS-1510-20: 882,152 hr.
DGS-1510-28: 516,593 hr.
DGS-1510-28P: 275,428 hr.
DGS-1510-28X: 516,593 hr.
DGS-1510-28XMP: 274,796 hr.
DGS-1510-52: 433,434 hr.
DGS-1510-52X: 416,789 hr.
Item Dimension (L inchxW inchxH inch)
21 x 19 x 5
Weight
15.75lb
Warranty Information
Lifetime