D-Link Accessory DPE-301GS 1Port Gigabit PoE Splitter Retail

DPE-301GS PoE Splitter


The DPE-301GS PoE splitter is used with end devices such as wireless access points, IP cameras and VoIP phones that dont natively support PoE, but rather require DC power input of 5V, 9V or 12V. It receives PoE power on a network cable from a PoE switch or midspan injector, and splits the Ethernet and DC power into two separate cables. One cable provides the DC power, and the other cable provides the Ethernet signal. Users can select from 5VDC, 9VDC and 12VDC power for their device using a selectable DIP switch on the device.


The DPE-301GS PoE splitter is typically located near the end device. It has two 10/100/1000 RJ-45 ports. One port is for PoE IN, which is the network connection and is usually connected to a remote PoE switch or injector. The other port is for LAN OUT, which is the connection that provides the Ethernet signal to the end device. The DPE-301GS also has a 5.5mm DC OUT port. Two adapter cables are supplied; either one may be connected to this port, depending on whether 5.5mm or 3.8mm interface is required for the end device.



PoE Injector and PoE Splitter Tandem


Both the DPE-301GI (injector) and DPE-301GS (splitter) can be used together, as a complete PoE transport system. This is especially useful when a PoE switch is not available, and the end device is not PoE capable, but the Network Administrator still prefers the benefits of PoE. Simply install the injector close to the network switch, install the splitter close to the end device, and plug in the cables.

PORTS:
PoE and Data
Label: PoE IN
IEEE 802.3 / 10BASE-T
IEEE 802.3u / 100BASE-Tx
IEEE 802.3ab / 1000BASE-T
IEEE 802.3af / 802.3at
Half/full-Duplex operation
CSMA/CD
Data
Label: LAN OUT
IEEE 802.3 / 10BASE-T
IEEE 802.3u / 100BASE-Tx
IEEE 802.3ab / 1000BASE-T
Half/full-Duplex operation
CSMA/CD
PHYSICAL and ENVIRONMENTAL:
Temperature
Operating: 32 F to 122 F / 0 to 50 C
Storage: -22 F to 158 F / -30 C to 70 C
Humidity
Operating: 5% to 95% RH
Storage 5% to 95% RH
Power Consumption
Maximum: 32.4 Watts
LED Indicators
Blue: Power On
Green: Link On
DC POWER OUT:
Switchable Output Voltage
5V DC, 2.5A max
9V DC, 2A max
12V DC, 2A max 100 - 240V, 50/60 Hz
Included Power Adapter Cables
5.5mm Male to 5.5mm Male
5.5mm Male to 3.8mm Male
PoE FEATURES:
Standards
IEEE 802.3af, IEEE 802.3at
Emissions (EMI) and Safety Certifications
Certifications: CE, FCC, VCCI, RCM, RoHS
Item Dimension (L"xW"xH")
5 x 3 x 1

Weight
1.00 lb

Warranty Information
1 Year Limited